What To Do When Your Bathroom Extractor Fan Is Not Working?

‚ÄčNormal functioning bathroom extractor fans are an important device in the bathroom as it ensures that your space is free from moist air and bad odours both of which are not only a nuisance but also a health hazard.

Just like any other device, the bathroom extractor fan may break or stop functioning. When this happens, there are several ways you can go about fixing it before resorting to a replacement. 

Here are some tips on what to do when the bathroom extractor fan is not working.

Check for Dust and Debris Accumulation

The accumulation of dust in the fan blades is one of the most common problems that may cause the bathroom extractor fan to stop working. Typically, this may be the case if you have lived in a house a while before cleaning your bathroom extractor fan. Remove the cover and use a flashlight to examine the fan blades for dust and debris. Make sure that power is switched off from the main source to avoid electrocution when examining the interior of the fan.

Clean the Fan Blades

Use a piece of dry cloth and some window cleaner to wipe off the dust from the surface of the fan blades. You can also use a cleaning brush with hard bristles to brush off the debris from the fan blades. Also, pay close attention to the joint between the blades and the motor. This area tends to accumulate a lot of dust thereby hindering the fan blades from rotating properly.

Check the Connections

Another reason your extractor fan may not be functioning could be loose or beat-up wiring. Check the wiring that connects the switch to the motor and if it is loose, use a screwdriver to tighten the nuts. Also, there are cases where the bolts are so rusty that they interfere with the flow of electricity to the motor. In such cases, you should get new ones from a local home improvement store and use them instead of the old ones.

Replace the Motor

If the extractor fan fails to work even after cleaning the fan blades and checking the wiring, then the problem is definitely in the motor. A faulty motor is another main reason that may cause a bathroom extractor fan to stop working. Luckily, it can be replaced. All you have to do is visit the home improvement store with your motor and ask for its replacement.

Purchase a New Bathroom Extractor Fan

This is the last resort in case all the above remedies fail, which is quite unlikely. Replacing your bathroom extractor fan with a new one may be an inevitable option if your attempts to clean the fan blades, check the wiring and replace the motor fail to yield positive results. Your replacement should not differ from your current extractor fan in terms of size. To ensure you get the right size, you can take your faulty extractor fan with you to the store and ask for a similar size.